Digital Media Center

Makerspace Fund: ENVD Crowdfunding Campaign

Anonymous — Tue, 29 Nov 2022 16:34:43 +0000

Makerspace Fund: ENVD Crowdfunding Campaign Anonymous (not verified) Tue, 11/29/2022 - 09:34

The Program in Environmental Design at the University of Colorado Boulder is hosting a crowdfunding campaign through Dec. 31, 2022, to raise funds for upgrading design technology used in our in-house creative labs and makerspaces.

The Environmental Design curriculum emphasizes hands-on and experiential learning. Our creative labs and makerspaces are heavily used by students daily. With advances in technology and software, upgrading and maintaining state-of-the-art equipment and tools for our students is a high priority.

With your generous donations, Environmental Design hopes to raise $10,000 towards upgrading 3D printers and laser cutters.

Learn more and donate today.

Off

Traditional

White

DMC hires new technicians, center updates

Anonymous — Fri, 17 Sep 2021 00:31:24 +0000

DMC hires new technicians, center updates Anonymous (not verified) Thu, 09/16/2021 - 18:31

Support technicians
The DMC has a lot of new faces! Returning DMC Technicians include Leah Lawson and Travis Weis. New this fall, the DMC welcomes the following incoming Assistant Technicians, Lauryn Howell, Ayden Brassell, Eliza Bourne, and Ella Lapello.

Reserving the photo studio
The photo studio (effective immediately) will allow reservations up to 15 minutes in advance. Please note that the photo studio will not always be available if you reserve it at the last minute, so please plan ahead.

Available tools & resources
The DMC has a few new tools and services this semester, so please scroll down on the DMC & CLC Canvas "start here" page to learn more about the new items the DMC provides.

Submit feedback
The DMC is always looking to improve, so if you have any suggestions or comments, please fill out the anonymous suggestion box form to let the center know what you are thinking. Need a specific tool? Want a certain workshop to be taught? Think we should change the layout? Fill out the form.

Hours of operation
The DMC hours will be expanding soon, and the center wants your input!
Submit your Preferences

Meet the DMC's new and returning technicians! Learn more about reserving the photo studio and available tools and resources.

Off

Traditional

White

8 things to know when using the Digital Media Center and Creative Labs Center

Anonymous — Tue, 24 Aug 2021 04:52:10 +0000

8 things to know when using the Digital Media Center and Creative Labs Center Anonymous (not verified) Mon, 08/23/2021 - 22:52

Digital Media Center (DMC)

Hours of operation: Monday–Friday, 9 a.m. to 6 p.m.

Large-format printing and 3D printing will primarily operate as a service model. �鶹��Ժ can submit their files for review and printing. Once prints are finalized, students will be notified when they are able to pick up their work. DMC staff will be available to assist students in setting up projects upon request. �鶹��Ժ should meet with DMC staff before using the 3D print room.

Submit a print job

The photography studio can be reserved for student use. �鶹��Ժ can use the photo studio in limited capacities. Photo equipment will be sanitized after each use, and students will be asked to use hand sanitizer before and after handling equipment.

Reserve the photo studio

Large equipment, such as cameras and laptops will be available for student checkout and will be sanitized after each use. Smaller items, such as studio supplies, will not be available for student checkout.
�鶹��Ժ can contact DMC staff through Microsoft Teams, email or by phone at 303-735-1704.

Learn more about the DMC

Creative Labs Center (CLC)

Hours of operation: Monday–Thursday, 9 a.m. to 8 p.m. | Friday, 9 a.m. to 5 p.m. | Sunday, 12 to 8 p.m.
*Aug. 31 thru Sept. 12: Monday–Thursday, 9 a.m. to 8 p.m. and Friday, 9 a.m. to 5 p.m. | Sunday hours begin Sept. 12
**Labs will be closed for orientation sessions on Aug. 24, 26, 31 and Sept. 2, 7, 9, from 8:30 to 10:30 a.m. and 3:55 to 5:55 p.m.

3D printers and the CNC machine will operate primarily as a service model. �鶹��Ժ can submit files via PaperCut and will be notified when their work is ready to be picked up.
The laser lab, wood lab and metal lab can be accessed by students through the service model, as well as in-person for students who have completed the CLC orientation and safety training. Labs will include an assembly area where students can perform post-processing and assembly of their projects.
�鶹��Ժ are welcome and highly encouraged to visit the CLC in person anytime during open hours to explore and engage. CLC staff are available to assist and support students with their design projects. Faculty and students should contact Jeff Allen, manager of the Creative Labs Center, to learn more about more opportunities when using the shop space.
�鶹��Ժ can contact CLC staff through Microsoft Teams, email or by phone.

Learn more about the CLC

ENVD creative labs and maker space are available for printing, making and checkouts.

Off

Traditional

White

Spring 2021 creative labs update

Anonymous — Fri, 05 Mar 2021 17:21:51 +0000

Spring 2021 creative labs update Anonymous (not verified) Fri, 03/05/2021 - 10:21

The Digital Media Center and Creative Labs Center continue to assist students with their fabrication needs through the web-based and in-person service model.

Reserve Makerspace

At this time, students do not have direct access to the fabrication labs, however, students can access the makerspace area in CINC 152. To adhere to applicable public health guidelines for in-person activities, students must reserve a makerspace table using the online reservation system.

Faculty can reserve Remote Lecture Hub space at both the ENVD and CINC buildings using the Outlook Room Calendar.

Support & Resources

�鶹��Ժ can access tutorials, tips and information about available capabilities for each center on the Creative Labs & Makerspace webpage, as well as the newly launched DMC/CLC Canvas course. �鶹��Ժ are encouraged to keep an eye on their email inbox for an invite to the Canvas course.

Submitting Fabrication Files

At this time, students will need to follow strict adherence to file submission standards. This will ensure a smooth fabrication process. �鶹��Ժ should monitor the status of their fabrication request and make necessary corrections noted in the PaperCut job ticket comment section.

For students taking ENVD courses remotely, out-of-state, and/or not in the Boulder area, fabricated projects can be shipped to their home address. �鶹��Ժ will not be charged for the cost of shipping, however, they will be responsible for purchasing materials used. In the case a project needs to be shipped, the student should inform their instructor and refer to the shipping guidelines.

The Digital Media Center and Creative Labs Center continue to assist students with their fabrication needs through the web-based and in-person service model.

Off

Traditional

White

Digital Media Center Updates

Anonymous — Fri, 02 Oct 2020 18:30:20 +0000

Digital Media Center Updates Anonymous (not verified) Fri, 10/02/2020 - 12:30

The Digital Media Center is open!

If you are in need of in-person services including, checking out equipment, large-format printing, scanning, 3D printing, etc… the DMC front desk is open at the ENVD building Monday thru Friday from 10 a.m. to 5 p.m. The DMC front desk will not be open on weekends.

If you need to check out equipment or need an appointment with the photo studio, please reserve it using the Patron Portal service.

The DMC has remote help hours Monday thru Friday from 9 a.m. to 6 p.m., and 12 to 6 p.m. on Sundays to assist with software issues, such as questions for Rhino, Revit, Grasshopper, and more. You can either log onto the DMC Help Room, or send the DMCS a message in Microsoft Teams.

You can also reach the DMC main phone at 303-735-1704 during business hours or email us at envdprintlab@colorado.edu.

If you are in need of in-person services including, checking out equipment, large-format printing, scanning, 3D printing, etc…The Digital Media Center is open!

Off

Traditional

White

Digital Media Center, Creative Labs Center move to service model

Anonymous — Tue, 08 Sep 2020 17:42:31 +0000

Digital Media Center, Creative Labs Center move to service model Anonymous (not verified) Tue, 09/08/2020 - 11:42

The Digital Media Center and Creative Labs Center will operate and assist students through a web-based and in-person service model, during the fall 2020 semester. �鶹��Ժ will not have direct access to the fabrication labs, photography studio, select scanners and smaller checkout items. �鶹��Ժ will have access to the makerspace area in CINC 152. Both labs will adhere to university social distancing and safety guidelines and expect students that use the space do the same.

�鶹��Ժ can reserve a makerspace tables on the online reservation system, which is similar to the one used for reserving time for the laser cutter. Faculty can also reserve studio and conferencing space located in the ENVD building and CLC in the ENVD program Outlook calendar.

�鶹��Ժ can access links for assistance with file setup and file submissions on the Facilities & Resources ENVD webpage. The quality of submission files will be key to the success of the new service model.

Both centers have several student assistants ready to help students with software questions. Help can be requested through the public channels on the ENVD-CLC-DMC Microsoft Team. �鶹��Ժ can connect with DMC and CLC between 9:00 a.m. - 9:00 p.m., seven days a week. Learn more about Microsoft Teams.

Video tutorials are being developed to assist students in preparing files for submission to each lab. They will be available on the ENVD YouTube channel.

File Submission Process

Required filename convention: Class_FirstName_LastName_Assignment#
File reviewed by TA and/or CLC/DMC staff member.
File submitted by the student to PaperCut.
Comments concerning additional corrections to file will be placed on PaperCut job ticket and an email is sent to the student.
*Incorrect file formats, will be discarded and the job will require re-submission.
The file confirmed to be correct.

File placed in the queue of the appropriate lab.
*Staff will not correct the file at the time of fabrication. The CLC will produce what they receive, if the submitted drawings are not accurate cuts will reflect those inaccuracies.
�鶹��Ժ will receive an email confirmation with an estimated time of completion.
Once in the lab queue, it may take 2-7 days for execution dependent upon current overall workload and the demand on individual labs. Typically, the laser lab will have the quickest turnaround and the CNC lab will have the longest.
�鶹��Ժ will receive an email confirming that parts are ready for pickup.

Acrylic, MDF and plywood will continue to be available for purchase through the labs. *Payment, via credit/debit card, must be made prior to taking possession of items.

The Digital Media Center and Creative Labs Center will operate and assist students through a web-based and in-person service model.

Off

Traditional

White